Wafer ea Silicon ea mofuta oa N kapa mofuta oa P ea lisenthimithara tse 6

6inch N-Type kapa P-type Silicon wafer CZ Si wafer Setšoantšo se Hlahisitsoeng

Tlhaloso e Khutšoanyane:

Li-wafer tsa silicon tse lisenthimithara tse 6 ke thepa e tloaelehileng ea substrate ea silicon e sebelisoang haholo tlhahisong ea lipotoloho tse kopantsoeng. Li-wafer tsena lia sebetsoa le ho hloekisoa ho etsa mefuta e fapaneng ea lipotoloho tse kopantsoeng, ho kenyeletsoa li-microprocessor, li-memory chip, li-sensor le lisebelisoa tse ling tsa elektroniki. Melemo ea li-wafer tsa silicon tse lisenthimithara tse 6 e kenyelletsa sebaka sa tsona se seholo sa bokaholimo, conductivity e ntle ea mocheso, le litšenyehelo tse tlase. Litšobotsi tsena li etsa hore li-wafer tsa silicon tse lisenthimithara tse 6 e be e 'ngoe ea likhetho tse ntle bakeng sa tlhahiso ea lipotoloho tse kopantsoeng.

Romella imeile ho rona

Likaroloana

Hlahisa lebokose la wafer

Litlhaloso tsa Silicon wafer:

6inch Silicon wafer Kgolo: CZ, MCZ, FZ。

6 Silicon wafer Kereiti: Prime, Teko, Dummy, jj.

6inch Silicon wafer Bophara: 6 inch/150mm.

Botenya ba silicon wafer ea lisenthimithara tse 6.5.

Qetello ea Silicon wafer ea lisenthimithara tse 6: E le e khaotsoeng, e kopantsoeng, e betliloeng, SSP, DSP, jj.

6inch Silicon wafer Tataiso: (100) (111) (110) (531)(553) jj.

Wafer ea Silicon ea lisenthimithara tse 6 e sehiloeng: ho fihlela ho likhato tse 4.

Mofuta/Sejo se thusang sa silicon wafer sa lisenthimithara tse 6: P/B, N/Phos, N/As, N/Sb, Intrinsic。

6inch Silicon wafer Resistivity: CZ/MCZ: Ho tloha ho 0.001 ho isa ho 1000 ohm-cm. FZ: ho fihlela ho 20k ohm-cm.

Lifilimi tse tšesaane tsa Silicon wafer tse 6inch: (a)PVD: Al, Cu, Au, Cr, Si, Ni;, Fe, Mo. jj., Botenya ba ho koahela ho fihlela ho 20.000A/5%.

(b) LPCVD/PECVD: Oxide, Nitride, siC, jj，Botenya ba ho koahela ho fihlela ho 200.000A/3%.

Mekhoa ea 6inch Silicon wafer: a.DSP, e tšesaane haholo, e bataletse haholo, jj.

b. Ho fokotsa boholo, ho sila mokokotlo, ho arola, jj.c. MEMS.

Ho tloha ka 2010, Shanghai XKH Material Tech. Co., Ltd e ikemiselitse ho fa bareki litharollo tse felletseng tsa Silicon Wafer ea wafer ea lisenthimithara tse 4, ho tloha ho li-wafer tsa boemo ba ho lokisa liphoso tsa Dummy Wafer, li-wafer tsa boemo ba teko Test Wafer, ho ea ho li-wafer tsa boemo ba sehlahisoa Prime Wafer, hammoho le li-wafer tse khethehileng, li-wafer tsa Oxide Oxide, li-wafer tsa Nitride Si3N4, li-wafer tse koahetsoeng ka aluminium, li-wafer tsa silicon tse koahetsoeng ka koporo, SOI Wafer, MEMS Glass, li-wafer tse entsoeng ka mokhoa o ikhethileng tse teteaneng haholo le tse bataletseng haholo, jj., tse nang le boholo bo tlohang ho 50mm-300mm, 'me re ka fana ka li-wafer tsa semiconductor ka ho bentša ka lehlakore le le leng/mahlakore a mabeli, ho tšesaane, ho arola, MEMS le lits'ebeletso tse ling tsa ts'ebetso le tsa ho iketsetsa.